Reducing tee

A Reducing Tee is also called “unequal tee“,which means the tee branch pipe diameter is not same with the run pipe of the tee.Commonly, in a reducing tee,the branch pipe diameter is smaller than the running pipe.But there are also some project the branch pipe diameter of the tee is bigger than the run pipe,it means the branch is the inlet of the flow . Reducing tee Reducing tee Standard ASME/AN ...
  • PRODUCT DETAIL

A Reducing Tee is also called “unequal tee“,which means the tee branch pipe diameter is not same with the run pipe of the tee.Commonly, in a reducing tee,the branch pipe diameter is smaller than the running pipe.But there are also some project the branch pipe diameter of the tee is bigger than the run pipe,it means the branch is the inlet of the flow .

Reducing tee

Reducing tee

Reducing tee

Reducing tee

Standard ASME/ANSI B16.9,MSS-SP-75,DIN 2605,EN 10253-2,JIS B2311 or customer’s drawings
Size Seamless steel reducing tee:1/2″-36″ DN15-DN900
Welded reducing tee: 2″-96″ DN65-DN2400
Schedule/ Wall Thinkness SCH5s,SCH10s,SCH10, SCH20, SCH30, std, SCH40, SCH60, XS, SCH80, SCH100,
SCH120, SCH140, SCH160, XXS, SGP or any other required thickness
Materials Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N
ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti
ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H
Package Wooden Case, Plywood Pallet.